PP Ball Valve Manufacturer In India
- Home /
- PP Ball Valve
PP Ball Valve Specification
| Material Of Construction | Unplasticized Poly Vinyl Chloride | Construction | Multi Piece Body |
| Design | Single body moulded | Test pressure | 07 kg./cm2 |
| Max working temp | 60 c (consistently) | Size Range | 15 m to 80 mm |
| Connection End | Solid Plain and Ball Valve | Standard | As per requirement |
PP Flange End Ball Valve Technical Specification
| Material Of Construction | PP (Polypropylene) / HDPE(Highdensitypolyethylene) / PVDF(Polyvinylidene fluoride) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 70 c (consistently) | Size Range | ½" 15MM TO 12’’-315MM |
| Connection End | Flanged as per ANSI B 16.5 (150#) &BS 10 (Table D/E/F) & DIN STD. | Standard | As per manufacturers |
PP Flange End Ball Valve Material of Construction
| Material Specification | |||
| No. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Flanged end | 2 | PP / HDPE & PVDF |
| 2) | Body | 1 | PP / HDPE & PVDF |
| 3) | Ball | 1 | PP & PVDF |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
Polypropylene Flange End Ball Valve Dimensions
| Size | L | T | OD | ID | H1 | H | |
| In. | MM | ||||||
| 1/2" | 15MM | 129 | 12.5 | 100 | 13.5 | 130 | 69 |
| 3/4" | 20MM | 142 | 14 | 101 | 19 | 131 | 75 |
| 1" | 25MM | 160 | 20 | 123 | 24 | 165 | 89 |
| 1 1/2" | 40MM | 182 | 20 | 140 | 38 | 197 | 109 |
| 2" | 50MM | 208 | 22 | 165 | 50 | 200 | 121 |
| 2 1/2" | 65MM | 230 | 25 | 185 | 63 | 255 | 144 |
| 3" | 80MM | 251 | 25 | 201 | 75 | 255 | 150 |
| 4" | 100MM | 302 | 28 | 228 | 100 | 350 | 182 |
| 6" | 150MM | 428 | 30 | 300 | 150 | - | 236 |
| 8" | 200MM | 505 | 32 | 360 | 201 | - | 325 |
| 10" | 250MM | 570 | 34 | 425 | 242 | - | 310 |
| 12" | 315MM | 590 | 35 | 487 | 300 | - | 309 |
PP Screwed End Ball Valve Technical Specification
| Material Of Construction | PP (Polypropylene) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 70 c (consistently) | Size Range | ½"- 15MM TO 100MM- 4” |
| Connection End | Screw end (BSP thread) | Standard | As per manufacturer |
| Material Specification | |||
| NO. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Flanged end | 2 | Polypropylene |
| 2) | Body | 1 | Polypropylene |
| 3) | Ball | 1 | Polypropylene |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
All Dimensions are in ± 2 MM
| Size | L | OD | ID | H1 | |
| In. | MM | ||||
| 1/2" | 15MM | 115 | 30 | 13.5 | 130 |
| 3/4" | 20MM | 126 | 35 | 19 | 131 |
| 1" | 25MM | 123 | 45 | 24.5 | 165 |
| 1 1/2" | 40MM | 154 | 65 | 38 | 197 |
| 2" | 50MM | 178 | 76 | 50 | 200 |
| 2 1/2" | 65MM | 206 | 94 | 63.5 | 255 |
| 3" | 80MM | 222 | 107 | 75 | 255 |
| 4" | 100MM | 273 | 134 | 100 | 350 |
Advantages of PP Valves
- Effortlessness of setting up establishment and perpetuation
- PP Valves are lighter and trouble free to deal with the fixation
- This valve is less flat than Metal valves to Lime scale & dregs develop
- Ordinarily for all intents and purposes upkeep free
- As a result of their smooth inside surface, protection from cavitations and absence of erosion