Globe Valve Manufacturer In India

buy SDNR (Screw Down Non-return Globe Valves ) with 1/8" TO 2" / 6 MM TO 50 MM Size or Custom, view Globe Ball Valve Price

 

One of the main abilities of Fisher Globe Valve is to throttle and modulate the flow. Tibco Globe Valve can also be left partially open. This helps in adjusting the flow without stopping the process. Pvc Globe Valve is widely used in water treatment, water highlights, landfills, swimming pools, chemical handling, and food handling. Angle Globe Valve is available in tee, way, and angle patterns. Steam Globe Valve is used in applications where throttling service is required for instance steam or other media. Globe Valves For Flow Control offers a high flow rate with low pressure loss. Stainless Steel Globe Valve also offers resistance to reverse flow and water hammer. Globe Control Valve offers low point drain and is used in cooling water systems. 

Globe Valve Types include linear motion valves. Actuated Globe Valve can be adjusted to any desired level by rotating the handwheel. Globe Valve 1 Inch used in the fuel oil system, boiler, and main steam vent and drain. One of the important features of Flanged Globe Valve is to have the seat parallel to the line of flow. Manual Globe Valve thus becomes efficient when throttling commodities and yields minimum seat and disc erosion. This configuration of Globe Check Valve creates a large amount of resistance within the valve. The design of the High Pressure Globe Valve forces the flow of the commodity to change direction within the valve itself. This change in direction creates substantial pressure drops and turbulence in the piping system. Cryogenic Globe Valve is thus not advised to be used when pressure drop and flow resistance is to be avoided. 

Y Pattern Globe Valve minimizes the body distortion due to rigid body design and minimizes leak as well. Instrumentation Globe Valve offers much less leakage when compared to the gate valve. Forged Globe Valve can handle high pressure and temperature with minimum shrinkage, cracks, and porosity. Hydraulic Globe Valve is faster than gate valve in opening and closing. Screwed End Globe Valve cannot be used in a medium that contains particles, high viscosity along ease of cooking. High Pressure Globe Valve offers good sealing and low friction between sealing and surface. Duplex Globe Valve has a high strength that leads to lower weight. Ss 316 Globe Valve is used in marine engineering applications and can be used in low pressure applications.  We have been manufacturing all the above mentioned valves along with Ss 304 Globe Valve for generations and have been supplying them to various companies domestically and internationally. 

 

Table of Content

 

Call for small piece of 3 Way Brass and SS Globe Valve with Threaded, Tube End, Butt Weld, Socket Weld, Flange End Connection to test before buying

 

Material Specification of SS Globe Valve

 

What is Globe Valve ?

Valves are used to regulate the flow of gases and fluids in a particular piping system.  They are available in various types one such type is the global valve. Globe Valve Manufacturers In India supply these valves with a movable plug or disc and a stationary ring set. SDNR has a good shut off capability along with moderate to good throttling capacity. Bronze Globe Valve has a shorter stroke when compared to the gate valve. It is easy to machine and resurfaces the seat. SS Globe Valve can also be used as a stop check valve. However 3 Way Globe Valve also has certain disadvantages such as Os&y Globe Valve have a higher pressure drop. These Pneumatic Globe Valves require great force and a large actuator to seat the valve. 

 

Os&y Globe Valve Price list

 

View latest price & ready sizes of Pneumatic and Os&y Globe Valve with Upto 1500/ 3000/ 6000/ 10000/ 15,000 PSI Pressure Rating Ex Mumbai

 

Globe Valve Manufacturer in india

 

Pneumatic Globe Valve Types

1. Based on bore pattern
   • Y Type
   • Straight Through/TEE Pattern/Z-Body
   • Angle
2. Other Globe Valve Types
   • Needle
   • Plunger
   • Bellow
   • Three Way
3. Depending On Body Bonnet Connection
   • Welded bonnet
   • Bolted bonnet
   • Screwed bonnet
   • Union-ring bonnet
   • Flanged bonnet
   • Pressure-Seal bonnet

-->

Globe Valve Dimensions

 

Angle Globe Valve Function

 

Body designs of Globe valves

• Angle Pattern Globe Valves Design
• Tee Pattern Globe Valve Design
• Wye Pattern Globe Valves Design,

 

Application of Steam Globe Valve

• High-point vents and low-point drains when leaktightness and safety are major considerations
• Fuel oil system where flow is regulated and leaktightness is of importance
• Cooling water systems where flow needs to be regulated
• drains and Turbine seals
• main steam vents, Boiler vents and drains, and heater drains
• chemical feed, Feedwater,extraction drain systems and condenser air extraction
• Turbine lube oil system and others

 

Globe Valve Disks position

 

Working of Globe Valves For Flow Control

When the valves is activated to open the disk will oppositely move absent from the seat. When compared to a gate valves, a globe valves for the most part yields much less seat spillage. Typically since the disk-to-seat ring contact is more at right points, which grants the drive of closing to firmly situate the disk. Globe valves can be orchestrated so that the disk closes against or within the same course of fluid stream.

When the disk closes against the direction of stream, the active vitality of the liquid blocks closing but helps opening of the valves. When the disk closes within the same direction of stream, the dynamic vitality of the liquid helps closing but impedes opening. This characteristic is ideal to other plans when quick-acting stop valves are fundamental.

 

Available Nibco and Asahi Y Pattern Globe Valve with NPT, BSPP, BSPT, JIC, METRIC, UNF thread and 2 / 3 inch

 

Globe Control Valve Advantages and Disadvantages

Advantages:

• Shorter stroke (compared to a gate valves)
• Moderate to good throttling capability
• With disc not attached to the stem, valve can be used as a stop-check valve
• Good shutoff capability
• Easy to machine or resurface the seats
• Available in wye, tee, and angle patterns, each offering unique capabilities

 

Disadvantages:

• Throttling flow under the seat and shutoff flow over the seat
• Requires greater force or a larger actuator to seat the valve (with pressure under the seat)
• Higher pressure drop (compared to a gate valve)

 

Stainless Steel Globe Valve Part Names

 

1. Disk
2. Gland follower
3. Stem nut
4. Seat ring
5. Body-Bonnet gasket
6. Set srew
7. Body
8. Disk washer
9. Bonnet
10. Disk locknut
11. Packing
12. Handwheel
13. Gland
14. Stem
15. Back seat

 

Globe Valve Seating

 

Globe Valve vs Gate Valve

 

 

Angle and Steam Globe Valves For Flow Control can be manufactured as required with short lead times, view Globe Control Valve Types, function and body shape

 

Standards for Manual Globe Valve

API Standards for Globe Valves:

• API 598
• API 602
• API 623
• API 6D
• API 6FA

BS Standards for Globe Valves:

• BS 5152
• BS 1873
• BS 5352

MSS Standards for Globe valves:

• MSS SP 25
• MSS SP-85
• MSS SP 80
• MSS SP 61
• MSS SP 42
• MSS SP 45

 

Flanged Globe Valve Material Of Constrcution

 

 

UK, USA and Kingdom of Saudi Arabia are the Best market of Instrumentation Globe Valve