Monel 400 Compression Tube Fittings

  • Home /
  • Monel 400 Tube Fittings
Monel 400 Tube Fittings

Size Table of Monel 400 Tube Fittings Sizes

Tube Fittings Types Size OD Size Inch
Tube to Female Fittings 6mm to 38mm 1/4" to 1 1/2"
Tube to Pipe Fittings
Tube Fittings Accessories
Tube to Male Fittings
Tube To Union

 

Alloy 400 Ferrule Fittings Spec Chart

SPECIFICATION
ASTM B366/ ASME SB366, ASTM B564/ ASME SB564, ASTM B865/ ASME SB865
Equivalent To
SWAGELOK, PARKER, DK-LOK, HOKE
GRADE
Alloy 400/Monel 400/UNS N04400/2.4360
Sizes
1/8’’ to 2’’ and 3mm to 50mm
Ends
Threaded, Welding, JIC
Pressure Rating
1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Threads
NPT , BSPT, BSPP

 

Composition Standard Of Monel Alloy 400 Compression Fittings

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.30 max 2.00 max 0.50 max 0.24max 28.0-34.0 2.50 max 63.00 min –

 

Equivalent Grade Chart Of 2.4360 Monel 400 Tube Fittings

STANDARD WNR Material Number UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5
NU-30M
NiCu30Fe

 

Monel Grade 400 Compression Tube Fittings Mechanical Properties Analysis

Element Yield Strength (0.2%Offset) Melting Point Density Elongation Tensile Strength
Monel 400 Psi – 35,000 , MPa – 240 1350 °C (2460 °F) 8.8 g/cm3 40 % Psi – 80,000 , MPa – 550


Most Basic Form of Alloy 2.4360 Double Ferrule Fittings

Bulkhead Union Straight Union Reducing Union Union Elbow Union Cross Union Tee
Female Connector Male Connector Male Bulkhead Connector Female Bulkhead Connector Male to Male Elbow Male Elbow
Male to Female Elbow Female Elbow Male Run Tee Male Branch Tee Female Branch Tee Female Run Tee
Female Adaptor Male Adaptor Tube End Reducer OD Plug Bulkhead Lock Nut OD Cap

 

Following Testing Perform on 2.4360 Monel 400 High Pressure Compression Fittings

  1. Chemical Analysis - Spectro Analysis
  2. Intergranular Corrosion (IGC) Test
  3. Positive Material Identification - PMI Testing
  4. Macro Test
  5. Flaring Test
  6. Micro Test
  7. Flattening Test
  8. Hardness Test
  9. Pitting Resistance Test
  10. Mechanical Testing Such as Tensile, Elongation, Reduction of Area etc


 

Instrumentation Tube Fittings