Inconel 625 Compression Tube Fittings

  • Home /
  • Inconel 625 Tube Fittings
Inconel 625 Tube Fittings

Standard Configurations Of Inconel 625 Tube Fittings

  1. Tube to Tube – Tee, Bulk Head, Straight, Elbow, Cross
  2. Tube to Male – Male Tee, Male Elbow, Male Stud
  3. Female Connector – Female Elbow, Tee, Straigh
  4. Tube Closure – Cap, Plug
  5. Ferrule Set, Weld Connector & Nut

 

Specification List Of Alloy 625 Ferrule Fittings

BRAND NAME
OMS HYDRAULICS
Equivalent To
SWAGELOK, PARKER, DK-LOK, HOKE
Types
Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories
Threads
NPT , BSPT, BSPP
Sizes
1/8’’ to 2’’ and 3mm to 50mm
Material Specification as per ASME/ASTM
ASTM B564/564M and ASME SB564/564M Inconel 625
Ends
Threaded, Welding, JIC
Pressure Rating
1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi


Mechanical Properties Analysis Of Alloy 625 Ferrule Fittings

Grade Elongation (% in 50mm) minimum Strength of Yield 0.2% Proof (MPa) minimum Strength of Tensile (MPa) minimum Hardness
Rockwell B (HR B) maximum Brinell (HB) maximum
625 42.5 Psi – 75,000 , MPa – 517 Psi – 1,35,000 , MPa -930 – –

 

Chemical Compatibility Chart Of Inconel Alloy 625 Compression Fittings

Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. – – – – – 20.0 – 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40 –

 

Equivalent Grades Table Of Inconel 625 Din 2.4856 Tube Fittings

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625

 

You Must Know About Test done on Nickel Alloy 625 Compression Tube Fittings

  1. PMI testing
  2. Flaring test
  3. Flattening test
  4. Radiography test
  5. Third party inspection

 

Instrumentation Tube Fittings